CarPro Velvet Pad 3000 - 5" Sanding Pad

€5,95

Delivery between 03 May and 05 May

€5,95

Repairs deep defects without traditional sanding.

More Direct Correction

It reduces the "orange peel" effect and deep defects in the varnish while still polishing, shortening the correction time before finishing.

Less Dust

It delivers a level of action equivalent to P3000 without the typical haze of classic sanding, which simplifies the next step.

More Control in the Process

It works on the enamel texture with more clarity and less dust, ideal for those who want to even out the surface without going straight to traditional sanding.

CARPRO Velvet Pad 3000 – a polishing pad to reduce defects.

The velvet surface rests on an 80 PPI foam with a hardness of 3 kPa and a hook-and-loop base. This helps improve durability and maintain a more consistent contact reading.

Como Usar

Passo 1

Inspect with good light and confirm that the defects are in the top layer of varnish.

Passo 2

Center the polishing pad on a rotary tool, apply a few drops of suitable polishing compound, and spread it first at low speed.

Passo 3

It revs up to around 1100 rpm, works a wide area without pressure, and frequently monitors the dashboard temperature.

Passo 4

Remove residue, brush the polishing pad in the direction of the grain, and avoid creased edges and lines if you don't have a safe margin.

FAQs

It is recommended for rotary use for best results.

He uses a few drops of polishing compound, starts at low RPM, then climbs to about 1100 RPM, and always operates without direct pressure on the dashboard.

Expect to significantly reduce or diminish some deep defects, with action equivalent to P3000 and less haze than classic sanding.

Sim, todos os pedidos incluem um número de rastreamento que será enviado por e-mail após o envio do pedido.

Podes devolver até 14 dias depois de o receberes em casa. O produto deve ser devolvido na condição original, não utilizado, e na embalagem original.